- Description
- Brand
- Additional information
Description
Size: 600mm Length x 5mm.
Pedestal mounted automatic foot pedal sealer with foot switch, working height 870mm. The pillar can be shortened for mounting on a bench top. Foot Switch Sealers provide a faster hands free sealing operation.
Supplied with stand, pedestal, adjustable worktable and spare element.
All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge).
Approximately up to 10 packages can be sealed per minute. In automatic mode the sealer will close at preset intervals without the need to press the foot switch.
This sealer can be easily converted into a bench sealer buy purchasing a short stand tube.
Power 1500w, Weight 35kg
View Video in YouTube
Impulse Heat Sealers
Impulse heat sealers are one of the most common types of heat sealers. These have one or two heating elements which are covered by a layer of PTFE or Teflon® fabric type material which prevents the bag sticking to the sealer. The heating elements are not continuously heated; heat is only generated only when the jaws are closed and current flows. When the bag is placed in the impulse heat sealer, the jaws are closed and pressure maintained for the time of the seal (while the light is on). Then pressure is held for about 2 seconds to allow the seal to cool. Normally if your material is a clear (thermoplastic) plastic bag, if it is less than 150µ (600 gauge) and you require to seal two thicknesses then our standard impulse sealers will be suitable.
Foot Operated Impulse Sealers – PSF Range
Foot pedal operated sealers are great for low-medium usage they allow sealing to be operated with hands free to aid lifting or positioning your product. Most come with a floor stand and the working height is around 70cm so the operator can sit down. The seal width is wider than the hand sealers at 5mm giving a more aesthetic finish.
Important note.
A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.
This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively a B32 type breaker.
In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).
Brand
PackSealer
You PACK it, We SEAL it!
Additional information
Weight | 35 kg |
---|---|
Seal Width | |
Spares Kits | 1 Spares Kit, 2 Spares Kits, Maintenance Pack, No Spares Required |
Bag Material | Light Duty Thermoplastic, Medium Duty Thermoplastic, Metalised Laminate |
Capacity | |
Feature | |
Seal Length | |
Sealer Type |