450mm Vertical Heat Sealer Automatic Double Heat Foot Pedal Operated


450mm Vertical Heat Sealer Automatic Double Heat Foot Pedal Operated


  • Description
  • Brand
  • Additional information
  • Reviews (0)


Pedestal mounted 450mm Vertical Heat Sealer Impulse Sealer with foot switch.


450mm Length x 5mm Seal width, upper and lower sealing element for heavy duty bags.

Adjustable working height from 700mm to 900mm with an adjustable support shelf.

The 450mm vertical heat sealer is suitable for sealing bags that are required to kept upright, for instance; sacks for flowable product like liquids and powders or powders and bulky materials like gravel, aggregates or firewood.
Foot Switch Sealers provide a faster hands free sealing operation.
Supplied with stand, pedestal, adjustable worktable and spare element.

All heat sealers from PackSealer are built to the high specification. The sealer incorporates an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 250μ (2 x 1000 gauge). Approximately up to 8 packages can be sealed per minute.

In automatic mode the sealer will close at preset intervals without the need to press the foot switch.


The seal width is 5mm, however a 8mm conversion is available.

To ensure that you have continued products a maintenance kit is a good optional addition.

For heavy bags the vertical sealer therefore comes with a heavy duty support stand and adjustable product support tray.

Picture is for information and show the similar manual option.

Power 1500w, Weight 50kg

The PSV range of heavy duty sealers weigh 50kg therefore we deliver on a pallet.

Important note.

A spike in electrical demand can be created for a fraction of a second because of the initial load of the jaws closing and the heat being applied. Resulting in the electrical breaker tripping.

This type of spike is common with motors when they start up therefore we recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

In conclusion a B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip. For example this heat sealer can go over the 20amp (B20) for more than 3 milliseconds but not over the 32 amp (B32).

More information about Circuit Breakers



Since the year 2000 Packsealer has offered an enormous range of heat sealers, vacuum sealers, rotary band sealers, and packaging equipment the Pack Sealer branded machines are a cost effective alternative to the European manufactured equipment. PackSealer heat sealers; impulse heat sealer, direct or constant heat sealers and band sealers plus all the necessary spare parts to maintain these sealers. The impulse sealers include the simple manually operated hand sealers and foot sealers where the jaws are closed manually so are suited for low volume applications and automatic foot switch operated sealers for medium volume applications.  The foot pedal and foot switch are also available as double heated elements for heavy duty bags and the vertical sealer is great for sealing liquids and large heavy sacks. For high volume the rotary band sealers are the Pack Sealer machines that should be considered. All these are manufactured in stainless steel and are a fraction of the Audion prices. Spare parts are stocked; element wires, Teflon (PTFE), silicon pressure pads, cutter blades and fuses.

You PACK it, We SEAL it!


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.