Due to its portable character, the Superpoly heat sealer tongs are particularly suitable for sealing all kinds of strange and difficult shaped products. The bi-active seal bars (both upper and lower seal bar are equipped with a resistance wire) allows the sealing of thick polyethylene up to 2 x 0,3 mm. Furthermore it will be possible to seal most of the laminate films, a simple test will tell you if the machine will be adequate for your film or not.

The tongs need to be connected to a transformer, where the seal time can be set accordingly to the film you are using. Once the jaws are closed the button is pressed and the seal will start, indicated by a control light. After the sealing time has passed (max. 1-3 sec.) the sealing will stop automatically and you can open the tongs.

Price is for the 631PS only. The transformer needs to be purchased separately: Super Poly Transformer

Technical information

Super Poly Transformer

Voltage230V-1ph-50/60Hz

Consumption1500 W

Weight7 Kg

Dimensions27 x 19 x 19



Superpoly Technical information

Seal length 630 mm

Seal width3 mm

Opening of the jaws 30 mm

Weight2,1Kg

Dimensions40 x 70 x 15

SuperPoly Hand Held Heat Sealers

Sometimes called heat sealing tongs these can be taken to the package rather than taking the package to the fixed position heat sealer. The sealer connects directly to a transformer with a 5m lead, there is even an optional extension lead of an additional 5m.

They are simple and lightweight which means that they are ideal for awkward shaped and heavy packages.