The simplest and most economical type of 400mm impulse heat sealer sealer.

Size: Seal Length 400mm (16") x 2mm Seal width.

Sealer type: Impulse heat sealer:

The heating element is not continuously heated; heat is only generated only when the jaw is closed and current flows. When the bag is placed in the impulse heat sealer, the jaw is closed and pressure maintained for the time of the seal (while the light is on). Then pressure is held for about 2 seconds to allow the seal to cool. This means that ther is no heat up time and no power is consumed when the impulse heat sealer is not in use.

If you are sealing light duty PP or PE plastic bags or pouches up to width 380mm (15") then this 400mm impulse heat sealer is ideal.

Impulse Heat Sealer

Impulse heat sealers are one of the most common types of heat sealers. This heat sealer has one heating element which is covered by a layer of PTFE or Teflon fabric type material which prevents the bag sticking to the sealer. The heating element is not continuously heated; heat is only generated only when the jaws are closed and current flows. When the bag is placed in the impulse heat sealer, the jaws are closed and pressure maintained for the time of the seal (while the light is on). Then pressure is held for about 2 seconds to allow the seal to cool.

All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25 (2 x 100 gauge) to 2 x 150 (2 x 600 gauge).

Suitable for light duty applications, approximately 2-4 packages can be sealed per minute.

Power 600W. Weight: 7.0kg