PSF355A 350mm Automatic Foot Pedal Sealer
Sorry we're out of stock!
Enter your email address below and we’ll notify you as soon as it becomes available.
Not sure it's the right fit? Tell us what you're sealing or the machine you run and we'll make sure you get the right kit, even if it's a cheaper option.
- DescriptionRangeFoot-pedal impulse sealerssee the full range →
The PSF355A is a 350mm automatic foot pedal heat sealer for production environments where consistent, repeatable seals matter. Press the foot switch and the sealer completes the seal cycle automatically, so every bag gets the same result regardless of who is operating it.
Pedestal mounted with a working height of 870mm. The pillar can be shortened for bench-top mounting if floor space is tight. Produces a 5mm wide seal across films from 2 x 25 to 2 x 150 micron, at up to 10 packages per minute. Supplied with stand, worktable, and spare element.
The automatic timer is what separates this from the manual PSF355. On a shared bench or a long shift, seal quality stops depending on who is pressing the pedal. Set the timer for your film once, and every seal after that is the same seal, which is why packing benches running to hundreds of bags a day specify the automatic.
Specifications
Seal length 350mm Seal width 5mm Working height 870mm (shortable for bench mounting) Film range 2 x 25 to 2 x 150 micron Throughput Up to 10 packages per minute Weight 30kg Includes Stand, pedestal, adjustable worktable, spare element Spares & consumables for this machineThis machine seals at 5mm.Single 5mm seal.5mmPSW3555mm Spare WireView part →KITPSF355KPSF355 Spares KitView part →PTFEPSF355TPSF355 Roll of TeflonView part →Not sure which part you need? Call us on 0121 704 0294.Genuine parts, built and stocked by us in the UK.Fast UK dispatch on stock items, shipped from our Solihull warehouse. Replacement elements and PTFE strips come in the PSF355 spares kit. See our guide to foot pedal heat sealers, or browse all spare parts.
Common questions
What does the automatic timer actually do?
It runs the seal cycle for you. Press the foot switch and the machine clamps, heats for the set time, and releases. The operator never judges the timing, so under-sealed and over-sealed rejects stop depending on who is on the bench.
Can it be bench mounted?
Yes. The pillar shortens for bench-top mounting if floor space is tight. As supplied it stands pedestal mounted at a working height of 870mm.
Which spares fit this machine?
The PSF355 spares kit covers it: replacement heating elements and PTFE strips. The parts listed on this page under spares all fit. Elements are made here in the UK and held in stock.
What films can it seal?
Films from 2 x 25 to 2 x 150 micron at up to 10 packages per minute. If you are unsure about your bag, send us a sample and we will run it on the machine. Free.