500mm Hand Operated Impulse Sealer
Sorry we're out of stock!
Enter your email address below and we’ll notify you as soon as it becomes available.
Not sure it's the right fit? Tell us what you're sealing or the machine you run and we'll make sure you get the right kit, even if it's a cheaper option.
- DescriptionRangeHand impulse sealerssee the full range →
The PSH502 is a 500mm impulse sealer, the widest plain hand sealer in the PackSealer family. It seals polythene bags and pouches up to 480mm wide: clothing bags, A3 document bags, wide retail packaging that a 400mm jaw cannot take.
Impulse sealing means the element only heats while the jaw is closed, so there is no warm-up time and no power drawn between bags. The 800W element runs the full 500mm jaw, with the adjustable timer matching films from 2 x 25 to 2 x 150 micron at up to 6 packages per minute. Previously sold as the KS500.
If you cut bags from roll stock or tubing at this width, the PSH502C adds a sliding side cutter to the same jaw.
Specifications
Seal length 500mm Seal width 2mm Max bag width 480mm Film range 2 x 25 to 2 x 150 micron Throughput Up to 6 packages per minute Power 800W Weight 7.0kg Spares & consumables for this machineThis machine seals at 2mm.Single seal.KITPSH501RKPSH501 Round Wire Spares KitView part →KITPSH502KPSH502 500mm Heat Sealer Spares KitView part →Not sure which part you need? Call us on 0121 704 0294.Genuine parts, built and stocked by us in the UK.Fast UK dispatch on stock items, shipped from our Solihull warehouse. See our full range of desktop heat sealers, or browse all spare parts.
Common questions
What do people seal on a 500mm machine?
Clothing bags, A3 document bags, and wide retail packaging up to 480mm: anything that will not fit a 400mm jaw. It is the widest plain hand sealer in the PackSealer family.
How does an impulse sealer work?
The element under the PTFE strip heats only while the jaw is closed and current flows. Hold the jaw down while the light is on, give it a couple of seconds to cool under pressure, and the seal is done. No warm-up time, no power used between bags.
What maintenance does it need?
An element wire and PTFE strip, replaced when seals start looking weak or stripey. The parts listed on this page under spares all fit, and the elements are made here in the UK.
How much does a 500mm impulse sealer cost?
The PSH502 is £149.98 ex VAT. It replaced the old KS500, and spares for it are stocked in our Solihull warehouse.